24/7 emergency roof serviceBryantBentonAlexanderHaskellShannon Hills(501) 307-1440 24/7 emergency roof serviceBryantBentonAlexanderHaskellShannon Hills(501) 307-144024/7 emergency roof serviceBryantBentonAlexanderHaskellShannon Hills(501) 307-1440

Metal Roofing in Bryant, AR

Lifetime Construction Builders installs standing seam and R-panel metal roofs on homes in Bryant, Benton, Alexander, Haskell, and Shannon Hills. Each metal roof installation starts with a free inspection and a written estimate, and the price on it doesn't change.

Get a free estimate online
  • Arkansas contractor license RR0540591024
  • Family owned, in business since 2009
  • $1M general liability, $2M workers' comp
  • BBB Accredited Business
A brick ranch house torn off to bare plywood decking, with a ladder at the eave and old shingles on tarps in the yard
A brick ranch torn off to the plywood decking before its new roof.

Signs it's time for a metal roof on your Arkansas home

A free roof inspection from Lifetime Construction Builders checks for these signs, whether your existing roofing materials are asphalt shingle or metal.

On an asphalt shingle roof

  • Shingles near the end of their life, with a roof replacement coming either way
  • Repeat hail or wind claims on the same roof
  • An insurer pressing you about the roof's age

On an existing metal roof

  • Rust through the panels or at the cut edges
  • Loose, backed-out, or missing screws
  • Cracked rubber washers under the screw heads
  • Leaks at the panel laps or around vents and pipes
  • Seams pulling apart, or waviness across the flat of the panels (called oil canning)

Loose screws and cracked washers can be a metal roof repair rather than a new roof, and the inspection tells you which one your roof needs.

When a metal roof isn't the right roofing solution

Standing seam costs more up front than an Atlas shingle roof. R-panel costs less, but its exposed ribs and screws look like a barn or carport roof to some homeowners.

Quick answers about metal roof installation

How long does a metal roof installation take?

An R-panel roof takes 2–4 days and a standing seam roof 3–7 working days with Lifetime Construction Builders, tear-off included. Your roof's size and complexity set where your job falls in that range.

Can a metal roof go over my shingles?

Code allows it only over one dry, sound layer. Arkansas's residential code, based on the 2021 International Residential Code, sets that limit. Lifetime Construction Builders' metal roof price includes tearing the old roof off to the decking.

Is a metal roof loud in the rain?

Not over solid decking. Laid over decking, underlayment, an attic, and insulation, a metal roof is about as quiet as asphalt shingles, Metalcon reports. The loud ones are panels screwed to open framing on barns. Every Lifetime Construction Builders metal roof goes on over underlayment.

Will hail dent a metal roof?

It can. NOAA records 291 hail events in Saline County, 195 of them an inch or larger. A UL 2218 Class 4 panel won't crack from a 2-inch steel ball, but it can still dent. Some policies call dents cosmetic, so ask your agent before Lifetime Construction Builders orders panels.

Reviews from our roofing customers

Jon Speer stays in touch from the free inspection to the nail sweep. These Google reviews come from roofing customers, and none of them names a metal roof.

"Jon Speer did an amazing job and kept in touch very well throughout the entire process. He made sure all my needs were met and went above and beyond to make everything smooth and stress-free. Customer service was top-notch, and communication was clear and consistent the whole time. I highly recommend them to anyone needing roofing work." Lucy L., 5-star Google review
"Lifetime Construction Builders has completed three distinct roofing projects for me, all of the highest quality. The team is excellent at their tasks, always on time, communicative, and responsive to phone calls while solving problems. I would strongly recommend them." Clark R., 5-star Google review
"Very responsive and didn’t rip my head off on the quote. Highly recommend" Evan D., 5-star Google review

How we install a metal roof, from inspection to cleanup

Your metal roof job runs in six steps, from the free inspection to the nail sweep.

  1. 1

    Free roof inspection

    Jon Speer meets you at your home to look over the existing roof, measure it, and talk through standing seam and R-panel with you.

  2. 2

    A written estimate with a price that holds

    Your estimate is built from the panel type, the gauge, the paint system, the roof's size and complexity, and the tear-off. The price on it doesn't change.

  3. 3

    Tear-off to the decking

    The crew strips the old roof down to the decking, so the new roof doesn't sit on top of worn shingles.

  4. 4

    Underlayment over the whole deck

    Underlayment goes down over the full roof deck before the first metal panel does.

  5. 5

    Metal panels and trim

    Standing seam panels lock onto hidden clips, so no screw goes through the face. R-panel is screwed through the face, with a gasketed washer under each screw. Trim finishes the eaves, rakes, valleys, and ridge.

    A roofer kneeling on bare plywood decking, running metal valley flashing down a roof valley
    Metal valley flashing going down over bare decking.
  6. 6

    Cleanup and a nail sweep

    The crew cleans up the job and runs a nail sweep across your yard and driveway before leaving.

The first step costs nothing.

Call (501) 307-1440 for a free inspection

How much does a metal roof cost in Bryant, AR?

Lifetime Construction Builders charges a mid, fair price for metal roofing, and the number on your written estimate is the number you pay.

Metal vs. asphalt shingles: the cost compared

Typical prices for a home

  • R-panel (exposed fastener) metal roof$12,000–$22,000
  • Standing seam metal roof$20,000–$38,000
  • Standing seam per square foot, tear-off included$10–$16
  • Atlas shingle roof, for comparison$10,000–$25,000

Your price moves with the panel type, the gauge (29 or 26 on R-panel, 24 on standing seam), the paint system, the roof's size and complexity, and the tear-off.

Pay by credit card, check, or cash. Financing available, ask Jon. There's a 5% military discount.

Metal roof panels: standing seam, R-panel, steel, and paint

The panel you choose sets the look, the upkeep, and most of the price of your new roof.

Green standing seam metal roof on a white clapboard house with a brick chimney
Standing seam panels, eave to ridge, on a clapboard house.

Standing seam

Standing seam runs flat panels from eave to ridge, joined at raised seams over hidden clips. It's usually 24 gauge, and it looks like a house roof rather than a barn's.

Usually 24 gauge · hidden clips · no exposed screws

R-panel (exposed fastener)

R-panel is a ribbed panel screwed through its face, the same panel used on metal buildings and carports. It's the lower-cost metal roof, but every screw is a hole in it, so plan on a screw check at 10–15 years.

26 or 29 gauge · ribbed profile · exposed screws

Galvalume steel and Kynar paint

Galvalume is steel coated with an aluminum-zinc alloy. The panel manufacturer's warranty typically covers Galvalume against rust-through for 20–25 years and Kynar (PVDF) paint for 35–40 years. Kynar is the high-quality finish that holds its color longest; SMP paint costs less. Neither warranty promises the roof won't leak, and the exact years depend on the manufacturer. On top of the panel maker's, every installation is backed by our lifetime transferable warranty.

Stone-coated steel roofing, the third metal option

Metal roof questions homeowners ask

The desk answers the phone any hour if your question isn't here.

(501) 307-1440
How long does a metal roof last?

Often 40 to 60 years or more, the Metal Roofing Alliance says, two to three times as long as asphalt shingles. A free roof inspection from Lifetime Construction Builders tells you how much life your current roof has left.

Will a metal roof lower my homeowners insurance?

It depends on your insurer. Some discount metal roofs, and Arkansas's Act 427 of 2025 requires insurers to offer discounts on homes built to the IBHS FORTIFIED Roof standard. Get your agent's answer before Lifetime Construction Builders orders panels.

Does a metal roof attract lightning?

No. Lightning goes for the highest point nearby, not for metal, according to Metalcon, and steel panels won't burn. Lifetime Construction Builders installs both standing seam and R-panel steel roofs.

Will you help with an insurance claim on my roof?

Yes, at no extra cost. Lifetime Construction Builders helps homeowners with the insurance process after storm damage, and the roof inspection is free.

What if a storm opens up my roof before the new one goes on?

Call (501) 307-1440. A person answers 24/7, and Lifetime Construction Builders sends a crew the same day, within a few hours, to cover the roof.

Do you repair metal roofs too?

Yes. Lifetime Construction Builders repairs metal roofs as well as installing new ones, starting with the same free inspection and written estimate.

Who answers when I call?

A person at the desk in our Bryant office, 24/7. Lifetime Construction Builders is family owned, not a large corporation, run by owner Daniel Retana since 2009.

Metal roofing services in Bryant, Benton, Alexander, Haskell, and Shannon Hills, AR

Lifetime Construction Builders is a family-owned roofing contractor serving Bryant and the surrounding areas, the five central Arkansas towns listed here. Besides residential roofing, the crew replaces low-slope roofs on commercial properties. Our office is at 3519 Market Place Avenue, Suite 400, Bryant, AR 72022.

Get a free metal roof inspection and written estimate

Call the desk or send the form to set up your free inspection. The written estimate costs nothing.

A person answers 24/7(501) 307-1440

Please add your name.

Please add a phone number we can call.

Please choose a town.

Please choose one.

Call (501) 307-1440 Quote